Install the Android 4.3 update on Galaxy S3 and Galaxy Note 2 ... - FusionServ

In the past few hours, were released updates to Android 4.3 Jelly Bean for Samsung Galaxy S3 Vodafone branded and the Samsung Galaxy Note 2 No Brand .

In this post, is instead shown as perform the installation manually: of the two devices.

It should also be noted that the same post will be updated when the update will also be available for other versions of the two smartphones.

The preparation of Fusionserv.com does not assume any responsibility in respect of any damages that the following procedure may cause to your device.

This process, shown by way of illustration, it should be carried out only by experienced users who know the full features and functionality of the device.

Before carrying out any of modding on Android devices is necessary to make a complete backup of the files.

Guide Manual installation of Android 4.3 on Samsung Galaxy S3 Vodafone

• Download and extract the firmware of Android 4.3 for Samsung Galaxy S3 Vodafone Italy HERE;
• Download and extract ODIN HERE
• Start the device in Download Mode ( Home + Power + Volume down )
• Connect your smartphone to your PC and wait for the confirmation of the program

Add

• AP_AP_I9300XXUGMK6_2168382_REV00_user_low_ship.tar.md5 AP

Add

• BL_I9300XXUGMK6_2168382_REV00_user_low_ship.tar.md5 BL

Add

• MODEM_I9300XXUGMK6_REV02_REV04_CL1413323.tar.md5 CP;

Add

• CSC_OXA_I9300OXAGMK6_2168382_REV00_user_low_ship.tar.md5 CSC
• Make sure re-partition NOT is flagged
• Press Start to start the installation.

If you have problems switching on the device:

• Start the device in recovery mode (Home + power + vol upward )

Make

• wipe / factory reset and reboot.

Guide Manual installation of Android 4.3 on Samsung Galaxy Note 2 No Brand

• Download and extract the firmware of Android 4.3 for Samsung Galaxy Note 2 No Brand Italy HERE;
• Download and extract ODIN HERE ;
• Start the device in Download Mode ( Home + Power + Volume down)
• Connect your smartphone to your PC and wait for the confirmation of the program

Add

• AP_N7100XXUEMK9_2138564_REV04_user_low_ship.tar.md5 AP;

Add

• BL_N7100XXUEMK9_2168382_REV00_user_low_ship.tar.md5 BL,

Add

• CP_N7100XXUEMJ9_REV08_CL1423182.tar.md5 CP;

Add

• CSC_OXX_N7100OXXEMK4_2174777_REV04_user_low_ship.tar.md5 CSC;
• Make sure re-partition NOT is flagged
• Click Start to begin the installation.

If you have problems switching on the device:

• Start the device in recovery mode (Home + power + vol upward )

Make

• w ipe / factory reset and reboot.